Neat Acoustics - Motive SX1 Loudspeaker - Walnut *Private Sale*
*Private sale on all Neat Acoustics*
*Contact us for pricing*
*Only available for in stock units*
The Motive range was a significant development for Neat as it marked the entry into the more mainstream market which was largely dominated by much bigger manufacturers.
A new tweeter was developed for this range, loosely based on the inverted titanium dome used in the original Ultimatum models. This tweeter offers a very detailed, uncompressed performance and gives the Motive models a level of dynamic and micro-dynamic insight unrivaled at its price point.
The entire Motive range was revised to the ‘SX’ status in 2013 using an improved version of the NMT tweeter – the SXT. The SXT tweeter employs the same massive magnet system, but with an anodized Aluminium dome replacing the previous titanium dome.
The crossovers, tuning and internals have also been updated, resulting in a wide-ranging improvement in all-round performance.Motive SX1 Although this is the taller of the two floor standers in the Motive SX range, the SX1 is nevertheless a compact and elegant model. It will blend discreetly into any living room whilst its performance gives little away to larger and more expensive models.
This loudspeaker uses a two and half-way configuration, with the bass/midrange driver and the tweeter operating within a sealed enclosure. The sub-bass drive unit is housed separately in a reflex-tuned section below.
The bass reflex port is fitted to the bottom panel of the cabinet and is vented through an outlet in the stylishly sculpted MDF plinth.
In spite of the compact dimensions, the Motive SX1 manages to accurately reproduce genuinely low bass notes with spacious and well-focused stereo imagery.
The tweeter is the new and upgraded unit used throughout the Motive SX range and features a huge screened magnet assembly and a 25mm inverted anodized aluminum dome.
This type of tweeter is usually only found in more expensive high-end loudspeakers and is, therefore, an exceptional inclusion to the Motive SX designs.
- Dimensions (HxWxD): 925/160/200mm
- Footprint (WxD): 220/260mm
- Weight: 14Kg Each
- System type: 2.5-way Reflex
- Impedance: 6 Ohms
- Sensitivity: 87 dB/1 watt- Bandwidth: 25Hz – 30kHz